• <nav id="wcuqu"><optgroup id="wcuqu"></optgroup></nav>
  • <xmp id="wcuqu">
  • <object id="wcuqu"></object><dd id="wcuqu"></dd>
  • Add:Yuecheng industry area

             of Jiangyin, Jiangsu

    Linkman:Tang Kaidong

    Tel:0510-86580268

    Fax:0510-6580278

    Post Code:214404

    Http://m.ramear.com

    E-mail:cg@chenggangz.com

    ………………………………◇◇◇Vacuum Drier Series◇◇◇…………………………………

     

    SZG Series Bipyramidic Rotary Vacuum Drier

      Use :

          This equipment is mainly used for drying following matters in medicine ,chemical and food industries :

      ●Matters which can not resist high temperature .

      ●Matters which are easily oxidized .

      ●Matters with crystals which should not be destroyed .

      ●Matters with the residual volatile material which should be retrieved .

      ●Matters with the discharged steam in drying which should be retrieved .

      ●Strong irritant and 、poisonous matters .

      Characteristics :

      ●Since the container runs continuously , the heating surface of the matter is always changed .

      ●There is no any pollution because of indirect heating .

      ●Thermal efficiency is high ,over two times higher than that of normal drying oven .

      Main Technical Parameters :

      Type SZG-0.1 SZG-0.2 SZG-0.3 SZG-0.5 SZG-0.8 SZG-1 SZG-1.5 SZG-2 SZG-2.5 SZG-3
      Volume (liter) 100L 200L 300L 500L 800L 1000L 1500L 2000L 2500L 3000L

      Technical

      parameters

      D

       ¢500  ¢600  ¢920  ¢1020  ¢1200  ¢1250  ¢1350  ¢1500  ¢1600  ¢1800
      H 1640 1890 2000 2360 2500 2500 2600 2700 2850 3200
      H1 1080 1160 1320 1400 1500 1700 1762 1780 1810 2100
      H2 785 930 1126 1280 1543 1750 1770 1800 1870 2590
      L 1595 1790 2100 2390 2390 2600 3480 3600 3700 3800
      M 640 700 800 1000 1000 1150 1200 1200 1200 1500

      Pipe 

      fittings

      a(Vacuum) Dg50 Dg50 Dg50 Dg50 Dg50 Dg50 Dg50 Dg70 Dg70 Dg100
      b(Steam) G3/4" G3/4" G3/4" G3/4" G3/4" G1" G1" G1" G1" G1"

      c(Condensed

      water)

      G3/4" G3/4" G3/4" G3/4" G3/4" G1" G1" G1" G1" G1"
      Motor power(Kw) 1.1 1.5 1.5 2.2 2.2 3 3 4 4 5.5
      Total weitght(Kg) 650 900 1200 1450 1700 1970 2280 2500 2700 2900

     

    2

     

    YZG/FZG Vacuum Drier

     

    Principle & Features :

        ▲The so-called vacuum drying is heating & drying of the materials under vacuum conditions to which ,vacuum pump is adopted for air-bleed and humidity suction thus speedy drying is reached .

        ▲When a constant heating temperature is maintained , increasing the vacuum can speed up the drying process .

        ▲When a constant vacuum is maintained ,increasing the temperature can also speed up the drying process .

        ▲Increasing both vacuum and heating temperature will speed up drying process significantly . 

        ▲Solvent in the materials van be re-collected through the condenser if it's adopted .

        ▲The condenser can be substituted by SK series water-ring vacuum pump or ZSWJ series hydropower spray vacuum pump unit if available .

      Application 

        ▲Suitable for drying thermal sensitive materials easily resolved .polymerized or deteriorated under higher temperature .

        ▲Sterilization can be conducted prior to the drying process ,during which ,no foreign matters is allowed to enter the materials .

        ▲Static vacuum drier elimintes the configuration damage of the drying materials ,it's therefore widely used in such fields as pharmaceutical ,foodstuffs ,chemicals and electries etc .

    Order notes 

        ▲Prices of vacuum drier listed in the quotation sheet indicate only the drier themselves ,those of vacuum pumps ,pipes and drying pallet are not induded .

        ▲Other accessaries and devices can be chosen ,designed ,manufactured & installed by our factory .

        ▲Initial humidity ,final humidity ,temperature ,vacuity ,drying volume ,time and heating methode (steam ,hot water or electricity ) for the materials should be provided upon orders to ensure an appropriate vacuum chier .

    Techinical data

    Description Specifcation
    YZG-600 YZG-1000 YZG-1400 FZG-15
    Internal size of drying cabinet(mm) ¢600×976 ¢1000×1527 ¢1400×2054 1500×1400×1220
    External size of drying cabinet(mm) 1153×810×1020 1693×1190×1500 2386×1657×1920 1512×1924×2060
    Layers of drying holder 4 6 8 8
    Layer distance(mm) 81 102 102 122
    Size of drying pallet(mm) 310×600×45 460×640×45 460×640×45 460×640×45
    Numbers of drying pallet 4 12 32 32
    Pressure inside the drying pipe(MPa) <0.784(8kg/cm2) <0.784 <0.784 <0.784
    Temperature of the drying holder℃ under 150℃ under 150℃ under 150℃ under 150℃
    Unload vacuum inside(MPa) ≤0.095 ≤0.095 ≤0.095 ≤0.095
    Water evporation rate 10 MPa vacuum and 110℃ temperature(kg/m2h) 7.2 7.2 7.2 7.2
    Model and power of the vacuum pump when condenser is used(kw) 2X-15A  2kw 2X-30A  3kw 2X-70A  5.5kw 2X-70A  5.5kw
    Model and power of the vacuum pump when condeser is not equippedkw) SK-1.5  3kw SK-3  5.5kw SK-3  5.5kw SK-3  5.5kw
    Weight of drying cabinet(kg) 250 800 1400 2100
    Above data are for reference only ,more detailed service is available .

     

     

     

    3

    GGD Series Vacuum Drying Oven

     

    ●High vacuity

    Weight empty the limit of vacuum (adsolute pressure)0.13-1.3pa(0.001-0.01t)

    ●High clean

        All material made from “304”or“321”,Surface polishing . Can all using in 100 grade clean , and something can using in 100 grade clean room ,so fit together special partition board (see drawing 3 ).

    ●Low temperature quick-drying

       The sovent  very easy gasification or distillation under high vacuity .

    ●Internal initiate

        The series products copy the similar products of external ,ingrate features and standard of fittings of made in our country ,meticulously design and made ,the price only 1/10 of the similar import products .  

     

    1.empty valve

    3.partition wall board

    5.measure pressure valve

    7.thermograph

    9.get in ans out hot-water flange

    11.leg

    2.handwheel

     

    4.arm

     

    6.air pump valve

     

    8.drying holder

     

    10.chest

     

    12.nameplate

     Main technical data

    Data Unit Model
    GGD-600 GGD-1000 GGD-1400
     Weight empty adsolute pressure inside chest Pa 0.13(0.001t) 0.65(0.005t) 1.3(0.01t)
    Hot-water temperature ≤100
    Allowable hot-water pressure MPa ≤0.7 
    Efficiency space inside chest mm×mm(¢×D) 600×620 1000×1000 1400×1400
    Hopper L×W×H mm×mm×mm 600×320×45 630×450×45
    Hopper putting quantity one 3 12 32
    Hopper total area M2 0.6 3.4 9.1
    Allowable space mm×mm×mm(A×B×C) 950×750×1500 1500×1200×1700 2270×1650×2100
    Total weight kg 2800 850 1950

     Interface table

    No. Uses Connectter Sealer Nominal Diameter(mm)
    Form 、Material Standard From、Material Standard GGD-600 GGD-1000 GGD-1400
    a Air pump  Welding flange JB19-75 O type silicon rubber JB921-75 25 50 80
    b Hot-water output Level welding flange

    JB81-59

    Pg0.1MPa

    Asbestos rubber 20 25 50
    c Hot-water import
    d Empty  Welding flange JB919-75 O type silicon rubber JB921-75 32
    e Measure pressure Welding cover flange JB920-75 O type silicon rubber JB921-75 10

     

    UP PRODUCT       NEXT PRODUCT

        

    版權所有:江陰市成干干燥設備有限公司  Copyright©Jiangyin Chenggan Drying Equipment Co.,Ltd.

    中文字幕精品无码亚洲字幕说说_免费看av在线网站网址_欧美a级毛欧美1级a大片_一级爱做片免费观看久久
  • <nav id="wcuqu"><optgroup id="wcuqu"></optgroup></nav>
  • <xmp id="wcuqu">
  • <object id="wcuqu"></object><dd id="wcuqu"></dd>